The #1 Mosaic Mesh / Adhesive Solution for the Professional and Hobbyist

No Days Mosaic Mesh is a fiberglass mesh designed for mounting mosaics indirectly to your substrate. The mesh is coated with our proprietary NO Days Mosaic Adhesive, a heat activated adhesive that allows you to quickly and securely bond your tiles to the mesh before permanently installing your mosaic using cement, thinset or mortar.

Why No Days Mosaic Mesh?

  • Allows mosaics to be easily transported and mounted vertically or horizontally
  • Designed for both indoor or outdoor mosaic application
  • Cure small areas, large areas or entire mosaic at once
  • Easily re-work or remove glass or tile pieces if necessary
  • Allows you to build on horizontal surface and mount your mosaic vertically
  • Bond glass or tiles to mesh using a standard heat gun
  • Non-Toxic, No Fume Byproduct

Garrett Family Garden at Goodlettsville Library in Goodlettsville, TN by Paige Easter and Dan Goostree
Garrett Family Garden at Goodlettsville Library in Goodlettsville, TN by Paige Easter and Dan Goostree

A Simpflified Mosaic Assembly Process

No Days Mosaic Mesh simplifies the process of building interior or exterior, large or small scale mosaics by providing you with a quick drying solution to adhering tiles to mesh. Additionally, you can easily rework the adhesive by reheating the tiles instead of digging away at cement products to fix an out of place tile. It’s easy to change your mind and change your design on a whim. You can cure large sections, small sections or entire mosaics all at once securing your design to the mosaic mesh substrate.  Your mosaic can then be easily transported or mounted either vertically (a wall or backsplash) or horizontally (on the floor or table) with ease.

NO Days Mosaic Mesh is the ideal solution for commercial designers and hobbyists alike offering strength, ease-of-use, flexibility and no mess all wrapped up in one powerful and convenient product.

A Quick 6-Step Mosaic Process

  1. Copy your pattern directly onto the mesh using a felt tip pen
  2. Place your glass or ceramic tiles on the mesh.  Make sure that the shiny side of the release paper (included in the packaging) is under your mosaic. The adhesive will not stick to the shiny side of the release liner. If the matte side is against the mesh, the adhesive will stick to it.
  3. Apply heat using a Heat Gun or Oven
  4. Transport or mount your mosaic using traditional mosaic methods
  5. Grout!  After allowing thinset or mortar to cure

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
no rating based on 0 votes
Brand Name
No Days Adhesives
Product Name
Mosaic Mesh