Subject: Streuter Technologies: How to clean needle tip?
Is there any way to clean the needle tip for use with the No Days glue? It seems to be plugged, and I can’t get it to work.
Thank you for any help-
|Fused Glass Frit Painting done using No Days Liquid Fusing Adhesive|
Dear X ~
My first question is which No Days glue are you using? Is it the No Days Liquid Fusing Adhesive or the HoneyDoo Zuper Glue?
We sell both, and I just want to make sure I’m giving you the right answer.
I’m going to assume the No Days Liquid Fusing Adhesive (LFA)…
the LFA dries, it is super strong! It can clog the tip or glue the
needle in the tip, as well. However, the LFA will soften itself. If my
tip (lid) is stuck together, I’ll generally turn the bottle upside down
for a few seconds and then wait for a bit and try to open the tip again.
Sometimes I have to use my pliers to help pry the needle out. I have
broken the needle off before, though, so make sure to let it soak
If you’re able to take the tip off of the bottle, you can soak it in
acetone (nail polish remover) or denatured alcohol for awhile and then
try to unclog it.
Let me know if this helps and if I’m answering the right question:)
|No Days Liquid Fusing Adhesive
with needle nose applicator tip
the Liquid Fusing Adhesive. (I did have a bottle of the HoneyDoo Zuper
glue too, but that stuff totally dried up for some reason) * Anyway, I
will try holding the bottle upside down and see if that works next time-
but for this time, I was finally able to get it unplugged with a
straight pin, working from both ends, and blowing on it. That could
have been the solution to the problem, however I think it was laying on
it’s side for a few minutes, so maybe that was what opened it up!
|Hi, there! Carrie, here…
Not only do I travel the country teaching folks how to use No Days
Since I get so many good questions, I thought it might be a great
If you’ve got questions, feel free to contact us at firstname.lastname@example.org.