NO Days Liquid Fusing Adhesive for Creating Glass Fusible Frit Pattern Designs

NO Days Liquid Fusing Adhesive is a necessary tool for any fused glass artist to have. It allows designers to create simple or intricate frit & powder designs will be held securely to the glass surface to prevent movement before firing in your kiln.

    Design a Frit Pattern that Actually Holds:

  • Wet the surface of your glass with No Days Liquid Fusing Adhesive, add frit and secure your design by dripping adhesive over the top. The needle tip applicator allows you to drip the adhesive exactly where you want it to go. Don't worry if you miss and get it on top of your glass, it burns off cleanly in the kiln!
    Your design can be shaped and manipulated until it has cured, 30 to 180 minutes (depending on temperature, humidity and how much you use). Need to transport your design before firing? In 10-30 minutes, No Days Liquid Fusing Adhesive will dry to a light tack and be ready to move. The adhesive will hold the frit pattern in place and burn off with NO residue! For best results, let the piece cure overnight before firing in a kiln.

  • Easy to Re-Work NO Days Liquid Fusing Adhesive

    Need to modify your design before firing, but it's already bonded? No need to scrape it off and start over! Apply a few drops of No Days Liquid Fusing Adhesive to the bonded frit and edit your design. Additional layers can be added using the same method. Saves time and materials!
    Firing Note: NO Days Liquid Fusing Adhesive can be fired in your kiln before fully cured, but it is not recommended. If you do fire it before the adhesive is fully cured, venting the kiln outside is highly recommended and some fuming could appear.
  • Step 2: Place the cut adhesive sheet on top of your substrate and begin to build your mosaic with glass, ceramic or stone tile.
    NOTE: If there are gaps between the tiles that are greater than 1/16", you'll need to use a tool (like tweezers or a skewer) to move the pieces around while you're heating. Pushing the pieces closer together, while the adhesive is heated, will cause the adhesive to fill in and "Grout" the gaps.

  • Works with more than just Frit

  • No Days Liquid Fusing Adhesive also works great for lightly tacking glass layers together or adding light weight accents such as metal leaf or metal foils.
    Each bottle of Liquid Fusing Adhesive includes a foam brush for even application of adhesive onto your glass surface and a needle tip applicator for design control.